I did some research on the web about how to change your ip address and nobody is addressing the real source that will force your Internet Service Provider (ISP) to give you a new IP address instanly!

The main question that was addressed to me was, why if I disconnect from my ISP and reconnect again I still have the same IP?

Each ISP has a pool of IP addresses assigned, in order to keep an order the ISP's will try to maintain the same IP's for people that are always connected, if you disconnect too long then that IP will be released and assigned to a new user. So this will be the easiest method to change your IP.

Then how will the ISP know that is mee reconnecting again?

To explain this you have to understand a few concepts, you connect to your modem (Cable, DSL or Fiber optic) through a NIC card on your computer (Network Interface Card) or ethernet card. Each NIC card has a specific MAC address that your ISP will use to identify you (the user) they will reserve and IP address for a period of time (6, 12, 24 hours, etc...) for each time you try to ocnnect with the same MAC address.

The beauty of this is that Addresses can either be "universally administered addresses" or "locally administered addresses." You can edit this MAC address in windows, Linux or directly in your router depending on which devide is connected to your modem.

If you have a router connected to your modem the procedure is very easy, unplug the power to your modem, then login to your router and look for a button that says "Clone Mac Address" you can also manually edit this address by changing one number or one letter. Make sure that you don't alter the format.

The MAC address is a hexadecimal format (letters A to F and numbers 0 to 9) with each octet separated by a dash or colon like this: 0a-1b-2c-3d-4e-9f if you edit one of theses number like changing the 3 for a 6 or the d by a c then reconnect to your ISP, they will think that you are a new user and assign a new IP address.

If you don't have a router you can edit this address in windows very easy, the first step is to find your current MAC address, to do so go to Start -> Run type CMD and press Ok. In the command pronpt or black window type the following: "ipconfig /all" without the quotes. This is what you should see:

Ethernet adapter Local Area Connection 1:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Intel(R) PRO/1000 PM Network Connection
Physical Address. . . . . . . . . : 00-16-D4-C2-9A-F7
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 48.231.xxx.xxx
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 48.231.116.xxx
DHCP Server . . . . . . . . . . . : 48.231.116.xxx
DNS Servers . . . . . . . . . . . : 48.231.116.xxx
Lease Obtained. . . . . . . . . . : December 20, 2007 8:55:57 PM
Lease Expires . . . . . . . . . . : December 20, 2007 11:55:57 PM

Make sure that you have the right NIC card in this case is "Intel(R) PRO", I highlighted the MAC address so you can clearly see it, keep note of this address and the IP address also to monitor if it changed after we are done.

Disconnect the power of your modem.

Now go to start -> Run and type sysdm.cpl press Ok. Click on the Hardware tab and then "Device Manager" browse for "Network Adapters" expand it by clicking the + sign look for the right NIC (in my case is Intel(R) Pro...) then right click on it and hit properties -> Click on the Advance Tab and select "Locally Administer Address"

Click on the Value box and paste the Mac Address you kept Ex: 00-16-D4-C2-9A-F7. Now change on digit click Ok, reconnect the power to your modem and you are done! You got a new IP instanly!

· Accessibility Controls---> access.cpl

· Add/Remove Programs control ---> appwiz.cpl

· Add Hardware Wizard---> hdwwiz.cpl

· Automatic Updates ---> wuaucpl.cpl

· Date/Time Properties control ---> timedate.cpl

· Display Properties control ---> desk.cpl or control desktop

· Display Properties "Appearance Tab Preselected" ---> control color

· Disk Management ---> dskmgmt.cpl

· Find Fast control ---> findfast.cpl

· Fonts Folder control ---> fonts

· Folders Properties ---> control folders

· Game Controllers ---> joy.cpl

· Internet Properties control ---> inetcpl.cpl

· Keyboard Properties control ---> main.cpl or control keyboard

· Mouse Properties control ---> main.cpl or control mouse

· Multimedia Properties control ---> mmsys.cpl

· Network Properties control ---> netcpl.cpl

· Password Properties control ---> password.cpl

· Printers Folder control ---> printers

· Power Configuration ---> powercfg.cpl

· Printers and Faxes ---> control printers

· Regional Settings ---> intl.cpl

· Sound and Audio Devices control panel ---> mmsys.cpl

· System Properties control ---> sysdm.cpl

· Windows Firewall ---> firewall.cpl

The registry on windows is a database single place for keeping all information as what programs are installed on your system, what hardware is attached "drivers that will use", all your preferences like favorite "desktop background", special system options that are selected, how computer memory is distributed, all startup programs, changes to a Control Panel settings, or File Associations, System Policies, etc.

The actual database files that make up the registry are stored in different locations depending on your version of Windows:

• Windows 95 & 98 it is contained in two hidden files in your Windows directory, called USER.DAT and SYSTEM.DAT
• Windows Me there is an additional CLASSES.DAT file, while under
• Windows NT/2000/XP the files are contained seperately in the %SystemRoot%\System32\Config directory.

Unfortunately every time we use the computer the registry will be modified in some way. Every time that you install a program entries are added to the registry and after some time chances are that you will remove that program to install a new version or a complete different one. This entries with time will make the registry a lot bigger than what is supposed to be and eventually slow down the performance of your computer.

Modifying Windows Registry is a very delicate task and deleting the wrong entry can render your PC practically unusable. The Internet is flooded with registry cleaning utilities that may remove vital system entries when cleaning your registry. Some of them have backup and restore options, but an error in Windows Registry may prevent Windows from booting - so not even a backup can help you at this point.

Error Nuker is a powerful utility that will scan the Windows Registry to identify errors and ways to optimize the performance of the Windows Registry.
Unlike other similar tools, Error Nuker is very careful with the registry

Perform a Boot Defragment

As we explained on the disk defragmentation article all files in your computer become fragmented at one point, this can drastically slow down your system, when the windows boot up files are fragmented the boot up times can increase significantly. The fastest way to speed up Windows XP startup is to make your system do a boot defragment, which will put together on your hard drive all the necessary boot files. When boot files are defragmented, your system will start faster.

Usually boot defragment should be enabled by default, but unfortunately this is not the case in most computers. To make sure that boot defragment is enabled on your system, click Start -> Run type "regedit" then locate the following key:

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Dfrg\BootOptimizeFunction

Right Click to Edit the enable string value to Y if it is not already set to Y as shown on the illustration. Exit the Registry Editor and reboot your computer. The next time you reboot, your computer will perform a complete boot defragment.